WELDED PIPE A-312

 T304/L, T316/L
 1/4" THRU 24" SCHEDULE 10 & 40
 1/2" THRU 4" SCHEDULE 80

SEAMLESS PIPE

 T304/L, T316/L
 1/2" THRU 12"
 SCHEDULE 10, 40, 80, 160 & XX

PLATE

 In grades 304L and 316L
 Thickness: .188" thru 2"
 Widths: 48", 60", 96"
 Lengths: 120", 144", 240"
 Specs: ASTM - ASME

SHEET

 In grades 304, 304L, 316L
 7 to 26 Gauge
 Finish: HR, 2B, #3/#4 Polish, Super 8
 Widths: 36", 48", 60"
 WLengths: 96", 120", 144"
 Specs: ASTM - ASME

DIAMOND TREAD PLATE

 In grade 304L
 Thickness: .188" and .250"
 Width: 48"
 Lengths: 96", 120", 144", 240"
 Specs: ASTM - MIL-F-20138

150# FITTINGS

 T304, T316 1/8" THRU 4" SW & THR'D
 Elbows(90,St. 90,45), Hex Bushings,
 Couplings(straight, half, reducing),Tees,
 Plugs(Square,Hex)

3000# PRESSURE FITTINGS

 T304/L, T316/L 1/4" THRU 4" S/W & THR'D
 Elbows(90, 45), Tees(straight, reducing), Unions,
 Crosses, Couplings(full, half, reducing),
 Inserts, Caps

BUTTWELD FITTINGS WELDED&SEAMLESS

 T304/L, T316/L 1/2" THRU 12" SCHEDULE 10,40 & SCHEDULE 80
 Elbows(90, 45), Tees(straight,reducing), Caps,
 Reducers(concentric, eccentric), Stub-Ends
 Large OD SCH 10,40 14" TO 20" WELDED

Valves

 T316 1/4" THRU 8"
 Ball(1, 2, or 3 pc.; reduced or full port;
 threaded, S/W, B/W, or flange-end), Gate(150#, 300#)
 Globe, Swing Check, Y-Stainers

FLANGES 150# & 300#

 T304/L, T316/L 1/2" THRU 24"
 SCHEDULE 10, 40 & 80
 Blind, Slip-On, Socket-Weld, Threaded, Weld-Neck
 1/2" THRU 4" (600#)

ROUND BARS 12 Ft. R/L

 .125" thru 16" Diameter
 In grades 303, 304,304/304L, 316, 316/316L, 416, 410, 630
 Specs: QQS - ASTM - ASME - AMS

SQUARE BARS COLD DRAWN 12 Ft. R/L

 .188" thru 3"
 In grades 303, 304, 304/304L, 316/316L
 Specs: QQS - ASTM - ASME - AMS

FLAT BAR (HRAP) 12Ft. R/L

 Thickness: .125" to 3" Widths: .500" to 6"
 In grades 303, 304/304L, 316/316L
 Specs: QQS - ASTM - ASME - AMS
 PLATE CUT FLATS - 1/8" TO 1/2" THICK by 1/2" TO 8" WIDE

ANGLES 20 Ft. R/L

 .750" to 4" Equal Leg, .125" to .375" Thick
 In grades 304, 304/304L, 316/316L
 Specs: QQS - ASTM - ASME - AMS

UNEQUAL LEG ANGLE 20 Ft. R/L

 3 x 2 x .250" and 4 x 3 x .250"
 In grades 304/304L, 316/316L
 Specs: QQS - ASTM - ASME

CHANNEL 20 Ft. R/L

 3 x 1.375 x .188, 4 x 1.750 x .250, 6 x 1.9 x .343
 In grades 304/304L, 316/316L
 Specs: QQS - ASTM - ASME